ICE MELTING CABLE

We have a variety of Ice Melting solutions, for more information on inventory and ordering please contact Hydro Smart.

GX SNOW MELTING CABLES, 208V - 600V

Installing a Danfoss GX Snow Melting System provides a permanent solution to the problems caused by cold weather. Improve safety by providing instantaneous relief from snow and ice and increase your bottom line by reducing the costs associated with applying chemicals, owning snow clearing machinery or hiring outside services.
- Twin conductor cable
- Single point connection
- Easy and flexible installation
- Silent, efficient, and safe
- For use in concrete, asphalt, and under pavers
- Zero EMF's (Electromagnetic fields)
- Genuine 10 year non-prorated warranty

DETAILS:
- Power leads are 20 feet in length
- 3" centers provides 50W/sq. ft.
- 4" centers provides 35W/sq. ft.
- Watt output of the 240V cable is reduced by 25% when operated at 208V (approximately 9Wft.)
- Watt output of the 277V cable is reduced by 25% when operated at 240V (approximately 9Wft.)
- Watt output of the 600V cable is reduced by 35% when operated at 480V (approximately 7.5W/ft.)

Back to top

NEXANS SNOW AND ICE MELTING CABLES

Nexans cable can be used to melt snow and ice safely on any ground surface.
- New Concrete — simply attach to reinforcing mesh inside with cable ties
- Pavers in a sand or concrete base – place directly under pavers
- Asphalt driveways — Can withstand the heat of hot asphalt
- Brick walks or entry areas
- Existing concrete to be covered with Flagstone, Tile or other natural stone.

The cable must be completely encapsulated within a cement, mortar or asphalt base. Installation is easy and the cable becomes completely concealed in the substrate you are heating and requires Professional installation and May be laid out by any building trades professional. Wiring must be done by a qualified, licensed electrician.